DuPont Non-Stick with Teflon Fluoropolymer is a unique dry-film lubricant made of 100% Teflon and surface binding agents. Dry lubricant will repel abrasive contaminants while lubricating. Formulated with Teflon for longer lubricant life, enhanced wear protection, better high and low temperature range and increased resistance to water. Use on surfaces requiring a dry, non-oily, non-staining, silicone-free film. Effective from -100Â°F to 480Â°F (-73Â°C to 250Â°C). Use on cutting surfaces such as saw blades, drill bits or on flat surfaces such as table saws. Works to lubricate tight tolerance gears or flat sliding surfaces such as treadmills.
Unique 100% dry-film Teflon coating and lubricant
Clean, long-lasting micro-thin, dirt-resistant coating effective from -100F to +500F
Uses proprietary resin-bonding technology for tight tolerance, metal-on-metal applications
Creates a thin, dirt-repelling, chemical-resistant coating
Safe for all surfaces does not contain silicone
DO NOT use this product in an attempt to repair or resurface any type of cooking equipment
Product Information Specifications for DuPont Teflon Non-Stick Dry-Film Lubricant Aerosol Spray, 10 Oz. Below:
Slip 2000 EWL was formulated especially for use on automatic rapid-fire and machine gun, riffles and pistols. Slip 2000 EWL contains an exclusive metal treatment designed to control friction, which reduces heat and eliminates excessive wear. It penetrates the micro-pores of the metal surfaces bonding itself to the metal allowing lubrication from within the metal itself.
Scumbuster Extreme, Powerful Motor Does the Scrubbing For You, Unique Roller Brush Design Cleans Faster Than Manual Methods, Fully Submersible, 3-In-1 Extension Handle Allows for Extended Reach, Rinsing & Accepts the Cleaner of Your Choice Interchangeable Accessories, 25 - 30 Minutes Of Run Time, Quickly Cleans Corners & Crevices For a Deep Down Clean.
The formulated solvents clean, soften and remove contaminants while the light viscosity oils ensure deep penetration into hard to reach moving parts. The high-grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475 degrees Fahrenheit) and tremendous pressure (up to 3000 pounds). The PTFE lubricant additives provide superior longevity in protection against moisture, rust, corrosion and metal-on-metal wear.
MOTORKOTE Hyper Lubricant additive is a premium synthetic heavy-duty formulation that bonds to metal surfaces on contact. It does not require heat to become activated providing protection against dry starts. It contains no solids to clog filters. MOTORKOTE can be added at anytime and is compatible with all motor oils including synthetics. MOTORKOTE does not alter SAE ratings or void warranties and carries a 100% money back guarantee. It works in all gas or diesel engines and other mechanical devices requiring lubrication protection such as transmissions, differentials and hydraulic machinery.
The Wilmar W50049 7-Piece Cordless Grease Gun Accessories provide the tools for all types of grease lubrication applications. Set comes with one press on 90 Degree angle tip, one straight extension tip, one 12-Inch hose extension, one slide one 90 Degree coupler, one rubber tipped nozzle, one needle nozzle, one 360 Degree coupler.
Use Boeshield rust free for the fast and easy removal of rust and stains! for light rust on steel or cast iron, spray rust-free on a rag and Wipe surface. Do not spray directly on surface, as it may cause spotting. For heavy rust, spray directly on rusted surface and scrub with Scotch-Brite pad. Wipe off and repeat if necessary. Rust-free works best above 70 degree F. Rust free is acidic and should be used with care. Use Boeshield t-9 after cleaning with rust-free to protect bare metal surfaces.
WD-40 100164 Multi-Use Product Spray Industrial Size 16 oz. (Pack of 1)
Manufacturer: The WD-40 Company
WD-40 is a trusted and proven problem solver that has so many uses and works so effectively it is found in tool boxes, work shops, garages and factories around the world. It is an essential problem solver in any maintenance environment. WD-40 is a true Multi-Purpose product. It lubricates, cleans & protects, loosens rusted parts, frees sticky mechanisms and drives out moisture to prevent rust & corrosion. WD-40 is available in sizes and delivery methods to meet every need.
CRC food grade silicone is a NSF rated H1, multi-purpose silicone spray for food processing and handling applications. It forms a colorless, odorless, non-staining film that lubricates and protects in most metal to non-metal applications. Food Grade Silicone eliminates binding and sticking, while protecting most surfaces. In addition it may be used as a release agent for many applications. Recommended to lubricate food processing and handling equipment, chutes, guides, rails, conveyors, bottling machinery, slicers, ovens, freezers, knives and saws. Other applications include lubricating coin mechanisms, linkages, locks, motor bearings, parking meters, projectors, pulleys, timers, rubber seals, tools, vending machines and ceramic insulators. Also recommended for metal-to-nonmetal and plastic-to-plastic lubrication applications.