The Peel & Stick Sanding Glove solves the problems of conventional sanding options by placing the sand paper directly into your hand. The detachable sandpaper allows the user to easily change grits of paper yet still use the same glove multiple times. Package includes: Right and Left Glove Set and 1 set of each grit sand paper (100, 180 and 220)
Brand: 2.25" Long Sanding Swabs
Variety Sanding Swabs - 2.25" long This package contains 9 different grits on the ends of 2.25" long swabs. These swabs are great for getting in the little areas that need a little touching up. Grits include 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, & 12000.
KENT Grit 400 Premium Diamond Hand Polishing Pad With Foam Back
Manufacturer: Made For Kent Supplies
Brand: Kent Supplies
KENT Premium Medium Grit 400 Diamond Hand Polishing Pad For Granite Stone GlassKENT Premium Diamond Hand Polishing PadsElectroplated Coarse Grit For Polishing Granite Concrete Marble GlassHard Foam Backed Hand Pads With Electroplated Diamond on Flexible Cloth, Metal Bond.Features: 1 Grit 400 (YELLOW), Size 90mm x 55mm, Electroplated Diamond on Flexible ClothFor Hand grinding and polishing with water on granite, marble, glass, composites, concrete, softstone, terrazzo, gemstone, ceramics and porcelain.Best on flat surfaceFor honing, seaming and repair of areas where hand polishing is practical.( DGW - 609 )
MEGK1000 Features: -Excellent for completely removing runs, sags, and other small, isolated defects on top of any paint surface. -1000 Grade Sanding Block. -Safe and effective for use on all paint finishes, including high-tech clearcoats. -Precisely uniform grit particles leave a smooth, even sanding pattern thatÃ¢â‚¬TMs easy to clean and polish to a flawless finish. Product Type: -Coated Abrasives. Dimensions: Overall Product Weight: -0.1 Pounds.
1inch x 1inch sanding sleeves are available in 120 fine grit, 80 medium grit, 50 coarse grit. Sleeves come in packs of 20 or 60 pack with 20 of each grit. Please specify grit under product options above.
Features: Jeweler's bench accessory for protecting workpieces Double-thick stitched top grain cowhide Provides firm work surface that won't scratch soft/precious metals Great as base when applying hammer or mallet blows, can also be used as buffing surface Natural veg-tanned leather, un-dyed, will last for years. 4 x 4" square, 1/4" thickness
Wal-Board Tuff-Lock Pro Drywall Pole Sander Head with Quick Release Clamps
Manufacturer: Wallboard Tools
Wal-Board Tuff-Lock Pro Sander Head (No Handle) Die cast aluminum base plate (3-1/4" x 9-1/4") with reinforced ridges to prevent "bowing" Universal joint with low center of gravity Polyethylene pad Tuff-LockTM clamp design allows several sheets of die cut sandpaper to be held at once
15" FLEXIBLE LONG BOARD SANDER/SANDING BLOCK-PAINT/AUTO
Brand: Full Speed Ahead
If you are in the collision repair industry this will probably be your sander of choice, in fact it may be more sander then you need. It'll easily allow you to find the lows and restore the panel to better then factory condition. This is also a wonderful tool to have in your arsenal when you get into tight spots with the 21 and need a little more swinging room. Made out of 8 lb. density foam, has a .015" thick base plate. Comes with 3 - 5/32" rods and ends caps. Each sander comes with a set of vinyl end caps to prevent the rods from sliding around and to prevent unwanted scratches when working in tight areas. How They Work and Why They are Unique: By adding or removing flexural rods of same or different diameters in different configurations, you change the pressure to flex-ratio. In other words, you control how much the sander flexes. These sanders will pick out lows that your hand or naked eye almost always miss. The number of rods inserted effects the stiffness of the sander. This allows you to go from sanding the fender of a 1940 Chevy to the hood of a 1965 Lincoln in a matter of seconds. Each sander comes with a set of vinyl end caps to prevent the rods from sliding around and to prevent unwanted scratches when working in tight areas. How They're Made: The base plate on the 4.5", 9", 15", 21" and 27" sanders is made from 1075 tempered spring steel. Ranging in thickness from .008 to .020" depending on length. The base plate on the 36" sander is a little thicker, made from .060" thick aluminum, (around 16 gauge). The flexural rod chases within the sanders are made from polyethylene and the foam handle is made from the finest foam available. What Type of Sandpaper Does it Use? Use adhesive backed sandpaper, or a type o