3M CP040-12-CC 4.875 by 2.875 by 1 Inch Sanding Sponge Single Angle, Fine grit (3-Pack)
Manufacturer: 3m Co.
3M Sanding Sponge CP040-12-CC Single Angle, 4.875-Inch by 2.875-Inch by 1-Inch, Fine grit. For detailed area. Rinse and reuse. Use wet or dry. For large areas and detail sanding. 3M(TM) Sanding Sponges are designed for wet or dry sanding on wood, paint, metal, plastic or drywall. Use this fine-grit sponge for smoothing patch and repair on walls and for between coat finishing to improve adhesion of additional coatings. This sponge features conventional 3M abrasives and is made with durable, flexible foam. Sanding is an integral step in preparing a surface to receive a coating. For the best sanding results, sand with the grain of the surface and work through a sequence of grits, from coarse to very fine, skipping no more than one grit between each sanding step. 3M sanding sponges are available in medium, fine and extra fine grits.
3M Scotch-Brite 7446 Non-Woven Silicon Carbide Blending Hand Pad - Medium Grade 6 in Width x 9 in Length - 65056 [PRICE is per BOX]
3M Scotch-Brite non-woven 7446 blending hand pad uses silicon carbide as the abrasive material. Since this product is non-woven, grade is generally used to describe the abrasiveness; with the 65056 having a medium grade. The blending hand pad has a width of 6 in and length of 9 in.
Dynabrade Sanding Disc Backing Pad - Hook & Loop Attachment - Medium Density 8 in Dia - 1500 Max RPM - Hook, Long, Non-Vacuum, 1/2 in - 54333 [PRICE is per EACH]
Dynabrade sanding disc backing pad has a diameter of 8 in. The hook & loop attachment allows for easy mounting to the tool or pad. To aid in dust control, this product is designed to work with vacuum systems and comes with 8 holes built into the Sanding Disc Backing Pad. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Dynabrade sanding disc backing pad can be run at a maximum speed of 1500 RPMs.
Dynabrade Coated Aluminum Oxide Disc Roll - Very Fine Grade 180 Grit - 5 in Dia - 5 Vacuum Holes - 79249 [PRICE is per DISC]
Features:The most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat appliPrepare primed and painted surfaces for finishing. Specifications::Dia.: 5"Backing Type: PSAVacuum Type: VacuumType: CoatedGrit: 180
Softback Sanding Sponge 02602, 4 1/2 Inches x 5 1/2 Inches, Superfine 2602 Product Description 3M™ Softback Sanding Sponge 02602, 4 1/2 in x 5 1/2 in, Superfine, 20 sponges per box, 6 boxes per case Additional Product Information 3M Part Number 02602 UPC 00051131026025 Case Quantity 6 box per case Case Inner Pack 20 sponges per box Product Form Scuff Pad / Abrasive Sponge 3M 2602 Softback Sanding Sponge 02602, 4 1/2 Inches x 5 1/2 Inches, Superfine
3M(TM) SandBlaster(TM) Dual Angle Sanding Sponge for sanding bare surfaces (9562). This 150-grit angle sponge is idea lfor surface preparation in small details and corners on bare wood, metal, and drywal. It cuts fast, lasts long, and is clog resistant.