KENT COARSE Grit 60 Premium Diamond Hand Polishing Pad With Foam Back
Manufacturer: Made For Kent Supplies
Brand: Kent Supplies
KENT Premium COARSE Grit 60 Diamond Hand Polishing Pad For Granite Stone GlassKENT Premium Diamond Hand Polishing PadsElectroplated Coarse Grit For Polishing Granite Concrete Marble GlassHard Foam Backed Hand Pads With Electroplated Diamond on Flexible Cloth, Metal Bond.Features: 1 Grit 60 (Green), Size 90mm x 55mm, Electroplated Diamond on Flexible ClothFor Hand grinding and polishing with water on granite, marble, glass, composites, concrete, softstone, terrazzo, gemstone, ceramics and porcelain.Best on flat surfaceFor honing, seaming and repair of areas where hand polishing is practical.( DGW - 598 )
LIMITIED TIME OFFER ON 12PACK FINE SANDING SPONGES.Excellent for those detailed area. Rinse and reuse. Use wet or dry. For large areas and detail sanding. Chalk Mountain Sanding Sponges are designed for wet or dry sanding on wood, paint, metal, plastic or drywall. Flexible foam for easier sand-ability. Sanding is an integral step in preparing a surface. For the best sanding results, sand with the grain of the surface. Chalk Mountain sanding sponges are available in medium, and fine grits.Please review attached instructions for best results.
Featuring a flexible 17" polyurethane base, flat and contoured surface sanding is quicker and more efficient than ever! The flexible base allows the board to conform to curves and body lines when block sanding without lifting off the surface, providing a perfectly even finish every time!
3M 341D Coated Aluminum Oxide Spiral Band - 36 Grit - 1 in Width - 3/4 in Dia - 17000 Max RPM - 11976 [PRICE is per EVENRUN BAND]
3M coated 341D spiral band uses aluminum oxide as the abrasive material and has a diameter of 3/4 in. 3M incorporates this aluminum oxide material into the spiral band forming a grit of 36. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This 3M spiral band can be run at a maximum speed of 17000.
3M (6234J) Flexible Diamond Disc TR 6234J, 3 in x NH M125 Micron [You are purchasing the Min order quantity which is 5 Disc's]
For hard to grind material, stone, glass, ceramic, metal, carbide, composites. Metal plated bond securely anchors micron graded diamonds to backing. For flat, edge, contour grinding and polishing. Heavy duty, water resistant, polyester backing.
Dynabrade Sanding Disc Backing Pad - Arbor Attachment - Medium Density 5 in Dia - 13000 Max RPM - 50282 [PRICE is per PART]
Features:Rubber molded pad with spiral ribs.Accepts abrasive discs with 7/8" (22 mm) center hole.Spiral ribs provide contact points and form air-flow channels, extending disc life.Slotted hub draws cool air behind disc.Flange nut included. Specifications::Pad MOS RPM: 13,000 RPM