Dynabrade Sanding Disc Backing Pad - Hook & Loop Attachment - Soft Density 5 in Dia - 13000 Max RPM - Hook, Radius Short, Non-Vacuum, 5/8 in - 57795 [PRICE is per PAD]
Features:Radius Edge Pad, Rounded Foam EdgeFor use with random orbital sanders. 5/16"-24 feamle thread.Rounded foam edge of soft density pad conforms to shape of coves and corners.Hook-Face attachment is offset from pad edge, allowing abrasive to flex around radius.Ideal for use with scalloped edge abrasives. Specifications::Maximum Operating Speed (MOS): 13,000 RPM
3M Cubitron 777F Coated Ceramic Disc - Coarse Grade 50 Grit - 12 in Dia - 2000 Maximum RPM - 88872 [PRICE is per DISC]
3M Cubitron coated 777F PSA disc 88872 uses ceramic as the abrasive material and has a diameter of 12 in. The grit for this item is 50. Abrasives such as this have a maximum RPM; this 3M PSA disc has a maximum RPM of 2000.
Description: This odorless, one-part, self-curing, acrylic latex caulk provides a flexible seal that bonds to most common household surfaces. Tub and tile caulks are designed to complement all Bostik grout colors.
Directions for Use: Read and understand datasheet completely before beginning installation. Always do a test to ensure product satisfaction and/or to become familiar with proper application techniques prior to use.
Use Bostik Tub & Tile Caulk to seal around bathtubs, shower enclosures, vanities, counter tops, basins and many other areas. Application: Do not apply where surface or ambient temperatures are below 40ËšF. Cut cartridge nozzle with a sharp blade to desired size for particular application. The inner foil seal must be punctured with an awl, wire or screwdriver. Insert cartridge into caulking gun. Apply caulking while holding at a 45Ëš angle, gun material into joint. Avoid excessive gun pumping action when approaching the end of a joint. After installation of caulk, the joint should immediately be tooled with a spatula, spoon or similar item to reduce voids and provide a consistent joint. Allow finished joint to cure 24 hours before subjecting it to water or contact. Surface Preparation: All surfaces must be clean, dry, and free from surface contaminants including pervious waxes, coatings and sealants. Clean up: Clean all tools with soap and warm water. Remove cured caulk with a sharp blade. Cure for at least 24 hours before exposing to freezing temperatures or intermittent moisture contact. Storage/Shelf Life: Store in temperatures between 40ËšF and 100ËšF. Shelf life is one year from the date of manufacturing.
Sanding sponges are ideal for contour sanding. Soft foam with an aluminum oxide abrasive coating, sanding sponges come in five different shapes and four grits: Shapes include block, round, combo, double slant and slant; approximately 2-3/4" x 4" x 1". 80-120 grit coarse, 120-180 grit medium, 220-280 grit fine, 400-600 grit super fine. Sold in bags of 10. Block Sanding Kit includes two, each, coarse, medium, fine and super fine sponges. Medium Grit Combo Kit comes with two, each, block, round, combo, double slant and slant sponges. Fine Grit Combo Kit contains the same shapes as the medium grit kit. USA.
Garryson Garryflexâ„¢ Abrasive Blocks are made from resilient rubber which is filled evenly throughout with hard abrasive grit. They are ideal for cleaning and polishing all metals and ceramics. Use instead of emery cloth, wet and dry, wire wool etc.This Garryson Garryflexâ„¢ Abrasive Block has the following specification: Grade: Medium 120 Grit.Colour: Grey.