A Quick And Easy Way To Hold Down Stock While Working On A Bench Topblack Baked Enamel Finish Resists Chipping Crackingperfect For Carving, Sanding, Routing And Shaping Workquick Release Design For Increased Versatility.
Platte River 96-001, Clamps And Vises, Miscellaneous, Air Cylinder 2" Diameter
Manufacturer: Platte River
Brand: Platte River
More powerful force than single cylinders. Powerful and fast for higher productivity. Compressed air applied to either of the two fittings on these double-acting cylinders drives the piston in a push/pull action and locks it in place at the end of its stroke:Clamping force is a multiple of air pressure supplied to the cylinder.Cylinders are rated at 250 psi; flow controllers at 150 psi. Two flow controllers, mounting bracket, mounting nut, aluminum foot, non-marring foot pad and jam nut included. USA.
Clamping Kit, Machinist, Includes 6 Step Blocks, 6 Serrated End Clamps, 4 Coupling Nuts, 6 Flange Nuts, 6 T-Slot Nuts , 24 Studs 5/8 In-11 4 Each Of 3 In, 4 In, 5 In, 6 In, 7 & 8 In Long, 1 T-Slot Cleaner, 1 Storage Rack, Slot Size 3/4 In, Application For Workholding During Machining Appplications, For Use With All Bridgeport Type Milling Machines & Drill Presses, Number of Pieces 54, T-Slot 15/32 In Width.
DE-STA-CO 810-S Pneumatic Hold-Down Clamp with Solid Bar, 750 lb Hold Capacity
The DE-STA-CO 810-S Pneumatic Hold-Down Clamp with solid bar has built-in air flow control that provides smoother operation for repeated operations compared to manual clamps. It is made of steel and has a solid clamping bar for durability. The magnetic ring piston accommodates round or T-slot sensors for positioning. The maximum holding capacity is 750 lb. and the maximum clamp bar opening is 99 degrees. The port size is 1/8" NPT. The operating temperature range is -14 degrees F to +194 degrees F. The maximum inlet pressure is 89 psi. It comes with a bolt retainer. Holding screw is sold separately.Pneumatic clamps require a compressed air hook-up, also known as a pneumatic hook-up, to initiate clamping pressure. They use pressure and a holding screw, also known as a spindle, or an arm to hold a component in place. Pneumatic clamps may have a fixed clamping point at the end of a solid clamping bar, an adjustable holding screw that can be moved down a U-shaped clamping bar, or an arm that extends and rotates to clamp the workpiece.DE-STA-CO manufactures clamping, gripping, transferring, indexing, and robotic tools. The company was founded in 1915 and is headquartered in Auburn, MI.What's in the Box?810-S Pneumatic Hold-Down ClampBolt retainer
De-Sta-Co Pneumatic Heavy Duty Clamp, 3,000 lb hold force, 4" clamp arm
Designed for high production applications, these pneumatic clamps offer exceptional clamping forces and holding capabilities. Does not require greater pressure to open than to close. This model has a 90 degrees arm. The angular locked position is precisely controlled by the hardened steel insert. The magnetic ring cylinders are used when there is a need to sense the open or closed position of the cylinder. Then by adding a tie rod mounted reed switch, the position of the cylinder can be sensed. 12.25 in (311.2 mm)H x 1.75 in (44.5 mm)L
The Festool VAC SYS System was designed to reduce setup time with simple and effortless clamping that allows for full surface access, which is perfect for routing, sanding, carving or just about any project you can imagine. Festool uses Clamping Modules with proven vacuum-based suction clamping to provide a highly effective and ergonomic work platform for nearly any project. These Clamping Modules provide the means to effectively clamp material or a workpiece for machining and finishing while protecting delicate surfaces from clamp damage. The Clamping Modules provide a means to rotate material 360Â° or tilt the workpiece from 0Â° to 90Â° as needed for even greater access. This Clamping Module is equipped with a quick-release valve and a suction head that adheres to any nonporous surface. By utilizing the accessory interchangeable Vacuum Cups, you can adapt to various surface sizes. Includes: Clamping Module, Oblong Vacuum Cup (275mm x 100mm), Hose with T-Connectors and Classic Systainer SYS 4.
These cylinder mount sensors are used to sense the position of the cylinder piston. Two sensors are required per clamp to sense both open and closed positions. For use with DE-STA-CO pneumatic clamp models 840, 841, 860, 861, 863, 864, 870-2, 871-2, 890, 891, 893, 1000, 1001.