Starrett bi metal unique jig saw blades. Bi-metal unique - breakthrough technology provides stronger, longer lasting, faster cutting blades. This new technology joins two strips of high-speed steel wires to a backing steel in a solid phase, using the principle of solid-state diffusion bonding agent - totally different from traditional weld or laser bonding processes that rely on metal diffusion as the union agent at the interface. The proprietary (patent pending) solid-state diffusion process generates 170 percent more weld contact area compared to the existing bi-metal high-speed steels. The result is significantly reduced fracture and breakage at the HSS/backing material interface. Soon after initial use, the teeth develop a groove in the very thin center of backing material at the cutting edge. Multi-Edge Performance, as a result, the cutting stroke produces dual chips that are more easily removed from the cut. For applications utilizing coolant, more of it flows to the cutting surface. This is the Split-Chip Advantage. Lower cost per cut. Application material thickness: 1/2 to 2-1/2-inches. Teeth per inch: 6 TPI. Measures 3-inches cutting length by 5/16-inches width by 0.050-inches thickness. Set type: Alternate. Shank type: Unified. Skip tooth. Curve fast cut type.
497-HHBF01 Features: -Tensioning Handle provides extra torque for straighter cuts and longer blade life. -Multiple Pin Locations for mounting blade at 90Â° or 45Â° for standard or flush-cut applications. -Locking Screw Design allows for storage of extra blades and secures blade for ''jab'' sawing. -Blade : 12 in. Dimensions: Overall Product Weight: -1.21 Pounds.
Shark Corp 01-2730 10.25 in. General Carpentry Double Blade Replacement Blade
Manufacturer: Shark Corp
This Ryoba blade design features both rip and crosscut teeth spaced farther apart, making the saw more. aggressive. A wide blade surface allows accuracy when cutting. This is an excellent saw for thicker wood and large tenions in post and beam construction, as well as for general carpentry. Hold the handle with both hands spaced well apart and find the most comfortable position, adjusting slightly for different cutting angles. Start cuts using a 0 to 10 degrees cutting angle with short strokes, gradually increasing to full length. DO NOT push down into the wood or jerk back on this or any pull-to-cut handsaw. Pull the saw towards you with long, smooth strokes. long, smooth strokes.
This carpenter handsaw from Craftsman features patent pending triple ground tooth geometry for up to 40% more cutting efficiency. Extra fine tooth count for a premium finish.
Thick 1 mm Blade offers rigidity and reduced binding
Professional soft grip handle offers commercial comfort and worksite durability
Dimensions and Capacity:
Overall Dimensions:24 in.
Handle Type:Soft grip